Free Installation Service for a Limited Time

Apex is offering FREE installation of Apex trigger kits and/or barrel fitting for customers that purchase Apex parts directly from Apex from May 1, 2018 through August 31, 2018.

If you purchased direct from Apex, either from our website or over the phone, your name, and the date of your purchase, are in our system. If that purchase was made between May 1, 2018 and August 31, 2018, you are eligible for the free installation. (Free installation does not apply to our revolver hammers, but does cover our J-Frame Spring Kit)

If you did NOT purchase your parts directly from Apex, then you are not eligible for the free installation offer and our standard labor charge of $85 for a complete trigger kit install applies. All other upper assembly service work is priced à la carte.


Step 1: Contact customer service at (623) 322-0200 to verify your purchase from Apex and its date. You can also place your order and arrange for the free installation.

Step 2: Apex customer service will go over the process with you and set up a service quote in our system, and a copy will be sent to you for final confirmation.

Step 3: Once your service quote is signed-off on, it’s time to ship your firearm. Customers are responsible for all shipping charges, and test-fire when applicable. All firearms must be shipped overnight via FedEx or UPS.


If you live in the Phoenix Valley area and are local to Apex, you can arrange with customer service for a service appointment to drop your firearm off. Here’s what you need to do.

Step 1: Contact customer service at (623) 322-0200 to verify your purchase from Apex and its date, or to place your parts order.

Step 2: Confirm you are local to Apex and would like to set up a service appointment to drop off you firearm. These are always scheduled out a minimum of 24 hours but can vary due to volume. We will try to accommodate your schedule as best we can.

Step 3: Drop off your firearm at scheduled time. Customer service will advise you as to when you can plan your pick up.

paul / June 21, 2018 / Gun Maintainence Tips


  1. Fernando padilla - June 21, 2018 @ 5:54 pm

    When u say overnite, does that mean next day air?

  2. paul - June 22, 2018 @ 7:30 am

    Yes. You have to ship firearms to Apex overnight for next day delivery.

  3. Jared Wells - June 22, 2018 @ 8:40 am

    If I purchase multiple products for the same pistol (ie. M&P 2.0 performance enhancement kit, barrel, and failure resistant extractor), are all installations free of done as part of the same order?

  4. Paul - June 22, 2018 @ 12:26 pm

    do u have the trigger for a Springfield XD9. I hate the trigger they put in it from the factory. I should have tried shooting it b4 buying it.

  5. paul - June 25, 2018 @ 7:53 am

    No we do not. Nothing for the Springfield XD line.

  6. paul - June 25, 2018 @ 7:54 am

    Yes, all are installed at the some time and the installation is free – provided you bought them direct from Apex.

  7. Lt. Craig P. Hebert - June 30, 2018 @ 10:08 am

    I am a law enforcement officer with the Iberia Parish Sheriff’s Office in New Iberia, La. I have an S&W M&P M 2.0 .40 caliber that I’d like to have a trigger job done on. I would respectfully request Apex Tactical to replace all S&W factory parts with your precision/tactical parts which I will gladly purchase from Apex Tactical prior to installation. I will be happy to send Apex Tactical my M&P M 2.0 for this action work if this will be alright. Thank you for all you do for the law enforcement professional.

  8. Victor - July 2, 2018 @ 11:09 pm

    I’m considering in purchasing the 4.25″ barrel for the M&P. Would the free installation promotion apply to both the semi-drop in and gun smith required versions?

  9. paul - July 3, 2018 @ 1:41 pm

    Yes. You can choose either barrel and both are available for free installation. Contact our customer service for additional information.

  10. paul - July 3, 2018 @ 1:42 pm

    Contact customer service and they will be happy to assist you.

  11. Robert - July 14, 2018 @ 8:47 am

    Shipping from Ohio to Arizona is like $85, so when you say ALL shipping charges, does that mean the whole thing will cost me $170 or so?

  12. paul - July 16, 2018 @ 9:05 am

    Yes. To and from Apex.

  13. Steve Bigelow - July 17, 2018 @ 10:45 am

    I have a Kimber Custom .45 caliber 1911 with a five inch barrel.

    1. Do you make .45 barrels for a Kimber Custom?

    2. Can you refer me to someone who does?

  14. paul - July 20, 2018 @ 7:52 am

    We do not offer a barrel for the 1911. Try contacting the various aftermarket barrel makers such as Cart, KKM and StormLake.

  15. Stephan - July 31, 2018 @ 7:16 pm

    If I buy the gunsmith barrel, can’t I just ship the slide? And if so, it doesn’t have to be overnight, correct?

  16. paul - August 6, 2018 @ 9:14 am

    We can fit the barrel to the slide BUT you will still need to fit the barrel to the frame. Contact customer service at (623) 322-0200 and they will assist you.

Leave a Reply

Your email address will not be published / Required fields are marked *