Apex Tactical Specialties

Installing The Apex Trigger Bar Kits for the Sig P320

Apex’s Scott Folk walks you through how to properly install your Apex Forward Set Trigger Bar Kit in the Sig Sauer P320 pistols. 112-041    Apex Forward Set Trigger Bar for Sig P320 112-031    Apex Forward Set Trigger Bar w/ Flat Advanced Trigger 112-032    Apex Forward Set Trigger Bar w/ Curved Advanced Trigger 112-030    Apex Forward Set Trigger Bar w/ Flat-Faced...

paul / February 13, 2018 / Gun Maintainence Tips / 0 Comments

Dial In Your Shield 2.0

With the new Action Enhancement Trigger (part# 100-170), Duty/Carry Kit (part# 100-176) and combined Action Enhancement Trigger & Duty/Carry Kit (part# 100-171) for the Shield 2.0, you can dial in the trigger pull weight to the range you prefer. Using different combinations of the Apex and factory sear and trigger return springs you can set your trigger pull in the Shield 2.0 from...

paul / January 18, 2018 / Gun Maintainence Tips / 4 Comments

Dial In Your M2.0 Flatty

With the new Flat-Faced Forward Set Trigger Kit you can dial in the trigger pull weight to the range you prefer. Using different combinations of the Apex and factory sear and trigger return springs you can set your trigger pull in the M2.0 from approximately 6.37 lbs down to 4.38 lbs. This range is based on our test sample so...

paul / November 10, 2017 / Gun Maintainence Tips / 13 Comments

Apex Customer Advisory Regarding Sig Sauer P320 Trigger Products

Due to Sig Sauer’s recently announced “voluntary upgrade” of the Sig Sauer P320 pistol, announced on August 8, 2017, Apex Tactical Specialties, out of an abundance of caution, has chosen until further notice to suspend sales of those aftermarket trigger products specifically designed for use in the Sig Sauer P320. Additionally, for those customers that have purchased an Apex Curved...

paul / August 10, 2017 / Apex News, Gun Maintainence Tips / 59 Comments

paul / March 29, 2017 / Gun Maintainence Tips / 0 Comments

paul / March 20, 2017 / Gun Maintainence Tips / 0 Comments

paul / March 16, 2017 / Gun Maintainence Tips / 0 Comments

How To ID The Apex Sears

Apex’s Fully Machined Sear was first introduced on December 23rd in 2009 – what we now celebrate as “Sear Day.” Designed by Apex’s founder, CEO and resident genius of design, Randy Lee, the Fully Machined Sear (the one with 1 Dot) reduces trigger pull weight, shortens over-travel and improves reset…like no other M&P sear can. That’s why it is and...

paul / March 16, 2017 / Gun Maintainence Tips / 2 Comments

Installing The Apex Action Enhancement Kit For Glocks

Below are step-by-step instructions for installing the Apex Action Enhancement Kit in Glock pistols. If after reading these instructions you still have questions, please contact Apex Customer Service at (623) 322-0200. WARNING! Always wear safety glasses when working on firearms. We recommend this product be installed by a competent gunsmith. Modification of your firearm may nullify the warranty of the...

paul / November 16, 2016 / Gun Maintainence Tips / 0 Comments

Installing Apex J-Plate Base Pad

Below are step-by-step instructions for installing the Apex J-Plate Base Pad for the Magpul GL9 PMAG. If after reading these instructions you still have questions, please contact Apex Customer Service at (805) 528-5250. WARNING! Always wear safety glasses when working on firearms. We recommend this product be installed by a competent gunsmith. Modification of your firearm may nullify the warranty...

paul / March 28, 2016 / Gun Maintainence Tips / 0 Comments

1 2 3

 

* indicates required