Installing The Apex Mk IV Kits

For those of you with a Ruger Mk IV model pistol, and a new Apex Action Enhancement Kit to go in it, the installation process is easier than you’d think. Scott Folk walks you through the step-by-step process for disassembly and reassembly of the frame in these new videos. If you run into any trouble while installing your kit, be...

paul / August 7, 2018 / Gun Maintainence Tips / 3 Comments

Installing The Apex Extractor In An M&P or M&P M2.0

Installing the Apex Failure Resistant Extractor in your M&P or M&P M2.0 is a lot easier than you think. In our newest installation video, Scott walks you step-by-step through the process, which is the same for both models. 100-068 Failure Resistant Extractor for M&P – Order Here 100-168 Failure Resistant Extractor for M&P M2.0 – Order Here

paul / June 20, 2018 / Gun Maintainence Tips / 0 Comments

Updated Installation Videos – SDVE

We’ve been working on updating our older installation videos and the latest to make it into the 21st century of video quality are those for the popular SDVE pistols from Smith & Wesson. Scott Folk, COO at Apex, walks you through the step-by-step process we use here at Apex to completely tear down the SDVE and reassemble it…with new Apex...

paul / May 14, 2018 / Gun Maintainence Tips / 2 Comments

Put Down The Hammer! We Mean It.

So, from time to time we get calls from customers that have crushed their trigger body. Usually they realize they did something wrong (like not following the correct procedure) and call to throw themselves on the mercy of the customer service gods. This probably explains the sign in customer service that reads, “CSR Games. May the odds ever be in...

paul / March 29, 2018 / Gun Maintainence Tips / 2 Comments

paul / March 29, 2017 / Gun Maintainence Tips / 0 Comments

paul / March 20, 2017 / Gun Maintainence Tips / 0 Comments

paul / March 16, 2017 / Gun Maintainence Tips / 0 Comments

Installing The Apex Action Enhancement Kit For Glocks

Below are step-by-step instructions for installing the Apex Action Enhancement Kit in Glock pistols. If after reading these instructions you still have questions, please contact Apex Customer Service at (623) 322-0200. WARNING! Always wear safety glasses when working on firearms. We recommend this product be installed by a competent gunsmith. Modification of your firearm may nullify the warranty of the...

paul / November 16, 2016 / Gun Maintainence Tips / 0 Comments

 

* indicates required