Apex Super Clamp for Steiner MPS "Classic" and MPS 2.0 Optics

What It Does:

The Apex Super Clamps replace the original optic clamp included with your Steiner MPS or MPS 2.0.  This Clamp has been engineered to expand the clamping range of your MPS optics to work on any dovetail mount manufactured within the ACRO rail mounting specs set by Aimpoint.  The Super Clamp is machined from steel and Black Oxide finished.

Expected Results:

- Replaces the factory optic clamp

- Allows the MPS to be attached to any optic mount that conforms to the Aimpoint ACRO dovetail specs.*

*Ask your optic mount manufacturer if their ACRO dovetail is designed and manufactured to Aimpoint's specifications for the ACRO rail. If not, we cannot guarantee that the Super Clamp will work as intended.

** DO NOT USE either Apex Super Clamp with mounts that are built oversize compared to the ACRO Specifications.  An oversize mount will cause undue stress on the Clamp and may cause breakage or damage to your other components.

Applicable to What Optics:

• 104-031: Works on the "Classic" Steiner MPS Optic. (Not the MPS 2.0)
• 104-035: Works on the Stenier MPS 2.0
  - Also works on the Classic MPS, but with slight visual gap ont he right side.

Torque Specs:

• Steiner recommends that the Fastening Screw be torqued to 2.1N-m which is 18.59 lb-in.
  - For simplicity, we recommend using a Fix-It-Stick pre-set to 18 in-lb to torque the screw on the Super Clamps.