We’ve added a new chart for approximate trigger pull results for our Metal Frame M&P M2.0 pistols with different spring combinations. This chart maps out how each combination affects the overall trigger pull weights.

Our goal with this data is to give you a practical guide for fine-tuning your setup so you can get the trigger pull that feels right to you. With our Flat-Faced Forward Set Trigger Kit for Metal Frame M&P M2.0s, you can dial in the trigger pull weight to the range you prefer by using different combinations of the Apex and factory sear and trigger return springs.

Our measurements were taken with a trigger scan machine, which pulls the trigger midline between the safety pivot pin and trigger guard. Your results with a manual trigger pull gauge will likely vary (probably lower than our readings) if you pull the trigger at the lowest point possible.

Please keep in mind that these are approximations. Trigger pull weights are approximate and can vary based on factory tolerances.

Click here to download the above chart