Gun Maintainence Tips
-
IDing The Ambi vs Reversible CZ P10 Mag Releases
When first introduced the CZ P10 C shipped with an ambidextrous magazine release. CZ has updated the magazine release design to a reversible style. Before upgrading your P10 C mag release with an Apex version, make sure yours is the original ambidextrous factory design. Here's how you tell the difference. -
New Armorer's Tool For FN 509
Apex has released a new armorer’s tool specifically for working on the FN 509 and FNS Compact model pistols. The FN 509/FNS-C Disassembly Fixture (Part #104-130) is designed for use with all current FN 509 and FNS Compact models, including the FN 509 Midsize. When used correctly, the fixture properly holds the FN 509 or FNS Compact pistol frame into... -
FN Install Assistance
Foreword The Forward Un-Locking Block Pin (FUBP) on the FN 509 and FNS series pistols can be very difficult to remove. It is our understanding that they are not considered to be end-user serviceable, so the disassembling an FNS or FN 509 should be undertaken only by a trained professional. We are aware that customers have been attempting to remove... -
Installing The Apex Mk IV Kits
For those of you with a Ruger Mk IV model pistol, and a new Apex Action Enhancement Kit to go in it, the installation process is easier than you'd think. Scott Folk walks you through the step-by-step process for disassembly and reassembly of the frame in these new videos. If you run into any trouble while installing your kit, be... -
Free Installation Service for a Limited Time
Apex is offering FREE installation of Apex trigger kits and/or barrel fitting for customers that purchase Apex parts directly from Apex from May 1, 2018 through August 31, 2018. If you purchased direct from Apex, either from our website or over the phone, your name, and the date of your purchase, are in our system. If that purchase was made... -
Installing The Apex Extractor In An M&P or M&P M2.0
Installing the Apex Failure Resistant Extractor in your M&P or M&P M2.0 is a lot easier than you think. In our newest installation video, Scott walks you step-by-step through the process, which is the same for both models. 100-068 Failure Resistant Extractor for M&P - Order Here 100-168 Failure Resistant Extractor for M&P M2.0 - Order Here -
Pistol Upper Assembly Service Available
Partial Services Available May 29 to August 31, 2018 For Pistol Upper Assembly Only Following on customer requests for assistance with barrel fitting, and in some cases installation of striker blocks, we are offering a limited amount of Upper Assembly Only service work. Some restrictions may apply. If you would like Apex to perform a service on your pistol’s upper... -
Updated Installation Videos - SDVE
We've been working on updating our older installation videos and the latest to make it into the 21st century of video quality are those for the popular SDVE pistols from Smith & Wesson. Scott Folk, COO at Apex, walks you through the step-by-step process we use here at Apex to completely tear down the SDVE and reassemble it...with new Apex...