Step-By-Step Installation

  1. Installing The Apex Mk IV Kits

    Installing The Apex Mk IV Kits
    For those of you with a Ruger Mk IV model pistol, and a new Apex Action Enhancement Kit to go in it, the installation process is easier than you'd think. Scott Folk walks you through the step-by-step process for disassembly and reassembly of the frame in these new videos. If you run into any trouble while installing your kit, be...
  2. Installing The Apex Extractor In An M&P or M&P M2.0

    Installing The Apex Extractor In An M&P or M&P M2.0
    Installing the Apex Failure Resistant Extractor in your M&P or M&P M2.0 is a lot easier than you think. In our newest installation video, Scott walks you step-by-step through the process, which is the same for both models. 100-068 Failure Resistant Extractor for M&P - Order Here 100-168 Failure Resistant Extractor for M&P M2.0 - Order Here
  3. Updated Installation Videos - SDVE

    Updated Installation Videos - SDVE
    We've been working on updating our older installation videos and the latest to make it into the 21st century of video quality are those for the popular SDVE pistols from Smith & Wesson. Scott Folk, COO at Apex, walks you through the step-by-step process we use here at Apex to completely tear down the SDVE and reassemble it...with new Apex...
  4. Put Down The Hammer! We Mean It.

    Put Down The Hammer! We Mean It.
    So, from time to time we get calls from customers that have crushed their trigger body. Usually they realize they did something wrong (like not following the correct procedure) and call to throw themselves on the mercy of the customer service gods. This probably explains the sign in customer service that reads, "CSR Games. May the odds ever be in...
  5. How To Disassemble The M&P Shield And M&P Shield 45 Slide

    How To Disassemble The M&P Shield And M&P Shield 45 Slide
    Tackling the slide disassembly on an M&P Shield or Shield 45 can be tricky. Watch as Apex’s Scott Folk takes you step-by-step through the process we use to disassemble, install Apex parts, and reassemble the slide.
  6. How To Disassemble The M&P Shield And M&P Shield 45 Frame

    How To Disassemble The M&P Shield And M&P Shield 45 Frame
    Getting ready to tackle a Shield install project? Apex's Scott Folk walks you through the proper frame disassembly process for the M&P Shield and M&P Shield 45.
  7. Installing The Apex Trigger On A Shield Trigger Bar

    Installing The Apex Trigger On A Shield Trigger Bar
    Apex's Scott Folk walks you through how to properly install your Apex trigger on the factory trigger bar for the M&P Shield and M&P Shield 45.
  8. Installing The Apex Action Enhancement Kit For Glocks

    Below are step-by-step instructions for installing the Apex Action Enhancement Kit in Glock pistols. If after reading these instructions you still have questions, please contact Apex Customer Service at (623) 322-0200. WARNING! Always wear safety glasses when working on firearms. We recommend this product be installed by a competent gunsmith. Modification of your firearm may nullify the warranty of the...

8 Item(s)